Your shopping cart is empty!
This is the ElectriFly AC/DC Triton2 EQ Computerized Charger, Discharger, Cycler and Balancer. **Primary differences between the TritonEQ and the Triton2 EQ are as follows;** TritonEQ Triton2 EQ Handles 1-14 NiCd & NiMH cells 1-24 NiCd & NiMH cells 1-6 LiPo/LiIon 1-6 LiPo/LiIon 1-6 (2-12V)Pb 3-12 (6-24V)Pb Fast Charge Current: 0.1-5.0A 0.1-8.0A Linear 63W max DC, 50W max AC 120W max DC, 100W max AC Battery Memories: 1 Battery Memories: 10 Cycle Count (NiCd, NiMH only): 1-5 cycles 1-10 cycles No thermal probe port Thermal probe port ***Upgraded features over the ElectriFly Triton Jr. include;*** Lightweight built-in switching AC power supply, plus DC input capabilities New reversed character LCD with backlight and 0-45° adjustable view angle Built-in balancing for 1-6S LiPo, Li-Ion or LiFe (A123) cells with FlightPower and ElectriFly adapters Up to 8.0A charge current FEATURES: Charges 1-24 cell NiCd, NiMH (1.2-28.0V), 1-6 cell LiPo, Li-Ion, LiFe (3.3, 3.6 or 3.7V cells) Adjustable charge current from 0.1-8 amps makes this charger ideal for many applications including tiny to large electric planes and helis, TX and RX batteries, field batteries and more 0.1-3.0A adjustable discharge current Built-in balancing for up to 6S LiPo, Li-Ion or LiFe (A123) cells with FlightPower and ElectriFly adapters (GPMM3200 and GPMM3201) Precision peak detection with adjustable sensitivity for NiCd and NiMH batteries Constant current/constant voltage charge method for Pb and lithiums Performs 1 to 10 cycles on NiCd and NiMH batteries, and recalls all data Configures up to 10 batteries in memory for instant, easy recall and charger setup Adjustable discharge cutoff voltages for NiCd/MH, pre-set voltages for Pb and lithiums Temperature sensing capabilities (GPMM3151 Thermal Probe available separately) Top-off charge feature fully charges NiMHs without overheating Reversed LCD with backlight plus a 0-45° adjustable view angle clearly displays input and output volts, peak volts, average discharge volts, charge and discharge capacity, currents and time data for 10 cycles, errors and individual lithium cell voltages Banana plugs on DC input with mating gator clips Safety features include cool-off time delay, maximum NiMH charge input, fast charge safety timer, current overload and reverse polarity protection Warning messages for improper input voltage, poor connections, unsuitable battery condition, reverse polarity on output Built-in cooling fan, for better charge efficiency and extended charger life One year limited warranty INCLUDES: ElectriFly AC/DC Triton2 EQ with alligator clips, ElectriFly and FlightPower adapters, and instruction manual REQUIRES: Charge leads depending on battery type Matching discharge leads depending on battery type HCAP0101 Futaba J Tx/Rx Charge Leads NO 9VAP Futaba J Tx/Rx Charge Leads 9VAP ONLY HCAP0105 JR Tx/Rx Charge Leads HCAP0106 Hitec/Airtronics Z Tx/Rx Charge Leads GPMM3148 Charge Lead BANANA/DEANS MALE U GPMM3149 Charge Lead BANANA/DEANS MICRO Charge Lead Banana Plugs To Traxxas Male SPECS: AC Input Voltage: 1100V 60Hz - 240V 50Hz (detachable AC cord) DC Input: 11-15.0V, banana plugs with mating gator clips included Number of Outputs: One Battery Types, # cells: 1-24 NiCd, NiMH (1.2-28.0V) 1-6 LiPo, Li-Ion, LiFe (3.3, 3.6 or 3.7V cells) 6, 12, 24V Pb (2V per cell) Fast Charge Current: 0.1-8.0A linear NiCd, NiMH, auto mode 0.1-8.0A for lithiums (1C max) and Pb 120W max DC, 100W max AC Fast Charge Termination: Peak detection NiCd, NiMH, cc/cv for Pb and lithiums, optional thermal cutoff for all battery types Trickle Current (NiCd/MH only): 0-300mA Peak Sensitivity (NiCd/MH only): NiCd 5-20mV, NiMH 3-15mV Peak Delay at Start (NiCd/MH only): 0-60 minutes Fast Charge Safety Timer: 0-990 minutes Max. Charge Cap: 0-9900mAh NiMH Top Off Charge: 0-1000mA Lithium Balancing Accuracy: 5mV per cell Lithium Balancing Connector: ElectriFly and FlightPower adapters included Lithium Max. Node Current: 300mA *Thermal Cutoff: 50-150°F (10-65°C) Discharge Current: 0.1-3.0A Discharge Cutoff Voltage: NiCd, NiMH 0.5-1.2V per cell LiPo and Li-Ion 3.0V per cell LiFe 2.5V per cell Pb fixed at 1.8V per cel Cycle Count (NiCd/MH only): 1-10 cycles Cycle Time Delay (NiCd/MH only): 1-60 minutes Battery Memories: 10 battery memories Programming Controls: Dial and 2 pushbuttons Display Type: 2x16 reversed LCD w/backlight & adjustable view angle Audible Indicators: 10 melodies, on/off Main Output Connection: Banana jacks Case Material: Aluminum and ABS plastic Cooling System: Built-in fan Current Overload: Solid state Case Size: 7.2 x 7.0 x 2.44 in. (184 x 178 x 62mm) Weight: 39.4 oz. (1116g, w/o AC power cord) * GPMM3151 - Triton Thermal Probe available separately
+30 2106834783
Phone Support
WORKING HOURS
Mon - Wed - Sat : 9:00 - 15:00
Tues - Thur - Frid : 9:00 - 14:00 & 17:00 - 20:00
RETURNS
Refunds are made within 10 days